Product information
How to install the FrameFit meeting edge styles
Price includes 2 x 2.1 mtr Door edge meeting styles
FFMES - FD30 2.1 mtr x 2 with Intumescent |
Gap Size | Configuration | Finished Gap |
9 | Carrier Only | 2mm |
10 | Carrier Only | 3mm |
11 | Carrier Only | 4mm |
12 | LM/1.5 | 3.5mm |
13 | LM/3 | 3mm |
14 | LM/3 | 4mm |
15 | LM/1.5 + LM/3 | 3.5mm |
16 | 2 x LM/3 | 3mm |
17 | 2 x LM/3 | 4mm |
18 | 2 x LM/3 + LM/1.5 | 3.5mm |
19 | LM/5 + LM/3 | 4mm |
20 | LM/5 + LM/3 + LM/1.5 | 3.5mm |
Application method: FRAMEFIT MEETING EDGE SEAL (FFMES30)
Location: On each door meeting edge
Supplied in 2100mm lengths - includes 1 layer HE1.5/44
Colour: Grey
-
Measure the gap/s between the door meeting edges: Max 4mm
-
Select the LM profiles required (if any) to reduce the gap between the meeting edges.
-
Using the s/adhesive tape on the back of each LM profile, encase the profiles within the FrameFit MES cover strips (FFMES30)
-
Place the FFMES cover strip over each meeting edge
-
Check resulting gap.
- Once satisfied, screw/pin fix through the FFMES into the door edges using a minimum of 40 mm long pins at approximately 350 mm centres ensuring screws/pins
Technical specifications
Product Code | MES449 |
Weight | 5kg |